logo
prodotti
Dettagli dei prodotti
Casa > prodotti >
6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump

6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump

MOQ: 1
prezzo: negotiable
Imballaggio standard: Cassa o cartone in compensato standard per l'esportazione
Periodo di consegna: 5-8 settimane
Metodo di pagamento: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Capacità di approvvigionamento: Tempo di consegna in alta stagione: 1-3 mesi, tempo di consegna fuori stagione: 1 mese
Informazione dettagliata
Luogo di origine
Unione europea
Marca
Grundfos
Numero di modello
SP 125-17
Liquidi da trasportare:
Acqua
Intervallo di temperatura del liquido:
-15 .. 40 °C
Temperatura del liquido durante il funzionamento:
20 °c
T liquido massimo a 0,5 m/sec:
°C 40
Densità:
998.2 kg/m3
Frequenza di potenza:
50 Hz
Tensione nominale:
3 x 380-400-415 V
Peso netto:
703 kg
Peso lordo:
808 kg
Flusso nominale:
125 m3/h
Salto netto:
348 m
Pressione ambiente massima:
60 Antivari
Pressione massima di funzionamento:
50.2 bar
Evidenziare:

6 Inch Anti Sand Well Pump

,

Submersible Borehole Deep Well Pump

,

Stainless Steel submersible well pumps

Descrizione di prodotto
Deep Well Pump
SP 125-17
Serial Number: 17ak0617


Applicable for:


  • Extraction of groundwater for domestic use
  • Pressure boosting for domestic water supply
  • Groundwater extraction


Stainless steel submersible pump. Materials include EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L). Typical applications: groundwater extraction, irrigation, mining, fountains, offshore operations, etc.


SP 125-17
It is a submersible deep well pump suitable for conveying clean water. It can be installed vertically or horizontally. All steel components are made of stainless steel, specifically EN 1.4301 (AISI 304), ensuring high corrosion resistance. This pump has drinking water approval.

The pump is equipped with a 170kW MMS10000 motor, featuring a sand shield, water-lubricated sliding bearings, and a volume compensation diaphragm. The rewindable motor structure allows full access to the windings for easy rewinding. The stator windings are PE/PA insulated and suitable for continuous operation (S1). It is suitable for temperatures up to 50 °C.

A mechanical shaft seal is installed on the pump. The motor is not fitted with a temperature sensor. If temperature monitoring is required, a Pt100 or Pt1000 sensor can be installed. The motor is designed for direct-on-line (DOL) starting.


6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 0


Liquid:
Liquid conveyed: Water
Liquid temperature range: -15 .. 40 °C
Maximum fluid temperature at 0.15 m/sec: 35 °C
Max liquid t at 0.5 m/sec: 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³


Technology:
Pump speed based on pump data: 2900 revolutions per minute
Rated flow: 125 m³/h
Rated head: 348 meters
Motor shaft seal: CER/CARBON
Approvals: CE, EAC, UKCA, SEPRO, MOROCCO
Drinking water certification: ACS, DM174
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES


Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Cast iron
DIN W.-Nr. 0.6025
ASTM Class 35-40


Installation:
Maximum operating pressure: 60 bar
Maximum permissible outlet pressure: 50.2 bar
Interface type: Rp
Connection size: 6 inch
Motor diameter: 10 inch


Electrical data:
Motor model: MMS10000
Motor flange design: Grundfos
Rated power - P2: 170 kW
Power required by the pump (P2): 170 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 365-365-375 A
Starting current: 570-600-600 %
Cos phi - Power factor: 0.85-0.81-0.77
Rated speed: 2910-2920-2930 revolutions per minute
Starting method: Direct start
Enclosure class (IEC 34-5): IP68
Built-in temperature conductor: No
Motor number: 96438116
Windings: PE2/PA


Others:
Net weight: 703 kg
Gross weight: 808 kg
Transport volume: 1.54 m³
Place of origin: AU

6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 1


 6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 2


6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 3


6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 4

Prodotti Consigliati
prodotti
Dettagli dei prodotti
6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump
MOQ: 1
prezzo: negotiable
Imballaggio standard: Cassa o cartone in compensato standard per l'esportazione
Periodo di consegna: 5-8 settimane
Metodo di pagamento: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Capacità di approvvigionamento: Tempo di consegna in alta stagione: 1-3 mesi, tempo di consegna fuori stagione: 1 mese
Informazione dettagliata
Luogo di origine
Unione europea
Marca
Grundfos
Numero di modello
SP 125-17
Liquidi da trasportare:
Acqua
Intervallo di temperatura del liquido:
-15 .. 40 °C
Temperatura del liquido durante il funzionamento:
20 °c
T liquido massimo a 0,5 m/sec:
°C 40
Densità:
998.2 kg/m3
Frequenza di potenza:
50 Hz
Tensione nominale:
3 x 380-400-415 V
Peso netto:
703 kg
Peso lordo:
808 kg
Flusso nominale:
125 m3/h
Salto netto:
348 m
Pressione ambiente massima:
60 Antivari
Pressione massima di funzionamento:
50.2 bar
Quantità di ordine minimo:
1
Prezzo:
negotiable
Imballaggi particolari:
Cassa o cartone in compensato standard per l'esportazione
Tempi di consegna:
5-8 settimane
Termini di pagamento:
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Capacità di alimentazione:
Tempo di consegna in alta stagione: 1-3 mesi, tempo di consegna fuori stagione: 1 mese
Evidenziare

6 Inch Anti Sand Well Pump

,

Submersible Borehole Deep Well Pump

,

Stainless Steel submersible well pumps

Descrizione di prodotto
Deep Well Pump
SP 125-17
Serial Number: 17ak0617


Applicable for:


  • Extraction of groundwater for domestic use
  • Pressure boosting for domestic water supply
  • Groundwater extraction


Stainless steel submersible pump. Materials include EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L). Typical applications: groundwater extraction, irrigation, mining, fountains, offshore operations, etc.


SP 125-17
It is a submersible deep well pump suitable for conveying clean water. It can be installed vertically or horizontally. All steel components are made of stainless steel, specifically EN 1.4301 (AISI 304), ensuring high corrosion resistance. This pump has drinking water approval.

The pump is equipped with a 170kW MMS10000 motor, featuring a sand shield, water-lubricated sliding bearings, and a volume compensation diaphragm. The rewindable motor structure allows full access to the windings for easy rewinding. The stator windings are PE/PA insulated and suitable for continuous operation (S1). It is suitable for temperatures up to 50 °C.

A mechanical shaft seal is installed on the pump. The motor is not fitted with a temperature sensor. If temperature monitoring is required, a Pt100 or Pt1000 sensor can be installed. The motor is designed for direct-on-line (DOL) starting.


6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 0


Liquid:
Liquid conveyed: Water
Liquid temperature range: -15 .. 40 °C
Maximum fluid temperature at 0.15 m/sec: 35 °C
Max liquid t at 0.5 m/sec: 40 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³


Technology:
Pump speed based on pump data: 2900 revolutions per minute
Rated flow: 125 m³/h
Rated head: 348 meters
Motor shaft seal: CER/CARBON
Approvals: CE, EAC, UKCA, SEPRO, MOROCCO
Drinking water certification: ACS, DM174
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Return valve: YES


Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Cast iron
DIN W.-Nr. 0.6025
ASTM Class 35-40


Installation:
Maximum operating pressure: 60 bar
Maximum permissible outlet pressure: 50.2 bar
Interface type: Rp
Connection size: 6 inch
Motor diameter: 10 inch


Electrical data:
Motor model: MMS10000
Motor flange design: Grundfos
Rated power - P2: 170 kW
Power required by the pump (P2): 170 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 365-365-375 A
Starting current: 570-600-600 %
Cos phi - Power factor: 0.85-0.81-0.77
Rated speed: 2910-2920-2930 revolutions per minute
Starting method: Direct start
Enclosure class (IEC 34-5): IP68
Built-in temperature conductor: No
Motor number: 96438116
Windings: PE2/PA


Others:
Net weight: 703 kg
Gross weight: 808 kg
Transport volume: 1.54 m³
Place of origin: AU

6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 1


 6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 2


6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 3


6 Inch Anti Sand Stainless Steel Submersible Borehole Deep Well Water Pump 4

Mappa del sito |  Norme sulla privacy | Buona qualità della Cina Pompa di ricircolo dell'acqua Fornitore. © di Copyright 2025 Tianjin Shiny-Metals Technology Co., Ltd. . Tutti i diritti riservati.