logo
prodotti
Dettagli dei prodotti
Casa > prodotti >
High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply

High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply

MOQ: 1
prezzo: negotiable
Imballaggio standard: Cassa o cartone in compensato standard per l'esportazione
Periodo di consegna: 5-8 settimane
Metodo di pagamento: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Capacità di approvvigionamento: Tempo di consegna in alta stagione: 1-3 mesi, tempo di consegna fuori stagione: 1 mese
Informazione dettagliata
Luogo di origine
Unione europea
Marca
Grundfos
Numero di modello
SP 95-20 N
Liquidi da trasportare:
Acqua
Intervallo di temperatura del liquido:
-15 .. 45 °C
Temperatura del liquido durante il funzionamento:
20 °c
Temperatura massima del fluido a 0,15 M/sec:
°C 40
T liquido massimo a 0,5 m/sec:
°C 45
Densità:
998.2 kg/m3
Frequenza di potenza:
50 Hz
Tensione nominale:
3 x 380-400-415 V
Peso netto:
401 CHILOGRAMMO
Peso lordo:
498 kg
Flusso nominale:
95 m³/h
Salto netto:
245 M
Pressione ambiente massima:
60 Antivari
Pressione massima di funzionamento:
42.9 bar
Evidenziare:

Deep Well Pump

,

SP Deep Well Pump

,

High Efficiency Deep Well Pump

Descrizione di prodotto
Deep Well Pump
SP 95-20 N
Serial Number: 19500320

Applicable for:

  • Extraction of groundwater for domestic use
  • Pressure boosting for domestic water supply
  • Groundwater extraction
  • Irrigation
  • Water supply for residential communities and buildings

Stainless steel submersible pump. Materials include EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L). Typical applications: groundwater extraction, irrigation, mining, fountains, offshore operations, etc.

SP 95-20 N
It is a submersible deep well pump suitable for conveying clean water. It can be installed vertically or horizontally. All steel components are made of stainless steel, specifically EN 1.4401 (AISI 316), ensuring high corrosion resistance.

The pump is equipped with a 92kW MMS8000 motor, featuring a sand shield, water-lubricated sliding bearings, and a volume compensation diaphragm. The rewound motor structure allows full access to the windings for easy rewinding. The stator windings are PE/PA insulated and suitable for continuous operation (S1). It is suitable for temperatures up to 50 °C.

A mechanical shaft seal is installed on the pump. The motor is not fitted with a temperature sensor. If temperature monitoring is required, a Pt100 or Pt1000 sensor can be installed. The motor is designed for direct-on-line (DOL) starting.
High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 0


Liquid:
Liquid conveyed: Water
Liquid temperature range: -15 .. 45 °C
Maximum fluid temperature at 0.15 m/sec: 40 °C
Max liquid t at 0.5 m/sec: 45 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³


Technology:
Pump speed based on pump data: 2900 revolutions per minute
Rated flow: 95 m³/h
Rated head: 243 meters
Motor shaft seal: SIC/SIC
Approvals: CE, EAC, UKCA, SEPRO, MOROCCO
Curve tolerance: ISO9906:2012 3B
Motor version: T45
Return valve: YES


Materials:
Pump: Stainless steel
EN 1.4401
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Motor: Stainless steel
DIN W.-Nr. 1.4401
AISI 316


Installation:
Maximum operating pressure: 60 bar
Maximum permissible outlet pressure: 42.9 bar
Interface type: Rp
Connection size: 5 inch
Motor diameter: 8 inch
Minimum borehole diameter: 206 mm


Electrical data:
Motor model: MMS8000
Motor flange design: Grundfos
Rated power - P2: 92 kW
Power required by the pump (P2): 92 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 194-186-186 A
Starting current: 520-590-620 %
Cos phi - Power factor: 0.88-0.86-0.83
Rated speed: 2870-2890-2890 revolutions per minute
Starting method: Direct start
Enclosure class (IEC 34-5): IP68
Built-in temperature conductor: No
Motor number: 96530100
Windings: PE2/PA


Others:
Net weight: 401 kg
Gross weight: 498 kg
Transport volume: 0.784 m³


High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 1


High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 2

High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 3High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 4

Prodotti Consigliati
prodotti
Dettagli dei prodotti
High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply
MOQ: 1
prezzo: negotiable
Imballaggio standard: Cassa o cartone in compensato standard per l'esportazione
Periodo di consegna: 5-8 settimane
Metodo di pagamento: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Capacità di approvvigionamento: Tempo di consegna in alta stagione: 1-3 mesi, tempo di consegna fuori stagione: 1 mese
Informazione dettagliata
Luogo di origine
Unione europea
Marca
Grundfos
Numero di modello
SP 95-20 N
Liquidi da trasportare:
Acqua
Intervallo di temperatura del liquido:
-15 .. 45 °C
Temperatura del liquido durante il funzionamento:
20 °c
Temperatura massima del fluido a 0,15 M/sec:
°C 40
T liquido massimo a 0,5 m/sec:
°C 45
Densità:
998.2 kg/m3
Frequenza di potenza:
50 Hz
Tensione nominale:
3 x 380-400-415 V
Peso netto:
401 CHILOGRAMMO
Peso lordo:
498 kg
Flusso nominale:
95 m³/h
Salto netto:
245 M
Pressione ambiente massima:
60 Antivari
Pressione massima di funzionamento:
42.9 bar
Quantità di ordine minimo:
1
Prezzo:
negotiable
Imballaggi particolari:
Cassa o cartone in compensato standard per l'esportazione
Tempi di consegna:
5-8 settimane
Termini di pagamento:
L/C, D/A, D/P, T/T, Western Union, MoneyGram
Capacità di alimentazione:
Tempo di consegna in alta stagione: 1-3 mesi, tempo di consegna fuori stagione: 1 mese
Evidenziare

Deep Well Pump

,

SP Deep Well Pump

,

High Efficiency Deep Well Pump

Descrizione di prodotto
Deep Well Pump
SP 95-20 N
Serial Number: 19500320

Applicable for:

  • Extraction of groundwater for domestic use
  • Pressure boosting for domestic water supply
  • Groundwater extraction
  • Irrigation
  • Water supply for residential communities and buildings

Stainless steel submersible pump. Materials include EN 1.4301 (AISI 304), EN 1.4401 (AISI 316), and EN 1.4539 (AISI 904L). Typical applications: groundwater extraction, irrigation, mining, fountains, offshore operations, etc.

SP 95-20 N
It is a submersible deep well pump suitable for conveying clean water. It can be installed vertically or horizontally. All steel components are made of stainless steel, specifically EN 1.4401 (AISI 316), ensuring high corrosion resistance.

The pump is equipped with a 92kW MMS8000 motor, featuring a sand shield, water-lubricated sliding bearings, and a volume compensation diaphragm. The rewound motor structure allows full access to the windings for easy rewinding. The stator windings are PE/PA insulated and suitable for continuous operation (S1). It is suitable for temperatures up to 50 °C.

A mechanical shaft seal is installed on the pump. The motor is not fitted with a temperature sensor. If temperature monitoring is required, a Pt100 or Pt1000 sensor can be installed. The motor is designed for direct-on-line (DOL) starting.
High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 0


Liquid:
Liquid conveyed: Water
Liquid temperature range: -15 .. 45 °C
Maximum fluid temperature at 0.15 m/sec: 40 °C
Max liquid t at 0.5 m/sec: 45 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³


Technology:
Pump speed based on pump data: 2900 revolutions per minute
Rated flow: 95 m³/h
Rated head: 243 meters
Motor shaft seal: SIC/SIC
Approvals: CE, EAC, UKCA, SEPRO, MOROCCO
Curve tolerance: ISO9906:2012 3B
Motor version: T45
Return valve: YES


Materials:
Pump: Stainless steel
EN 1.4401
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Motor: Stainless steel
DIN W.-Nr. 1.4401
AISI 316


Installation:
Maximum operating pressure: 60 bar
Maximum permissible outlet pressure: 42.9 bar
Interface type: Rp
Connection size: 5 inch
Motor diameter: 8 inch
Minimum borehole diameter: 206 mm


Electrical data:
Motor model: MMS8000
Motor flange design: Grundfos
Rated power - P2: 92 kW
Power required by the pump (P2): 92 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Rated current: 194-186-186 A
Starting current: 520-590-620 %
Cos phi - Power factor: 0.88-0.86-0.83
Rated speed: 2870-2890-2890 revolutions per minute
Starting method: Direct start
Enclosure class (IEC 34-5): IP68
Built-in temperature conductor: No
Motor number: 96530100
Windings: PE2/PA


Others:
Net weight: 401 kg
Gross weight: 498 kg
Transport volume: 0.784 m³


High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 1


High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 2

High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 3High Efficiency Grundfos SP Deep Well Pump For Efficient Water Supply 4

Mappa del sito |  Norme sulla privacy | Buona qualità della Cina Pompa di ricircolo dell'acqua Fornitore. © di Copyright 2025 Tianjin Shiny-Metals Technology Co., Ltd. . Tutti i diritti riservati.